Round coil winding G5010 and G5012

Round coil winding G5010 and G5012

"Roll selection" is controlled manually using an electronic joystick. The cycles "winding process" and "grabbing and trimming film" are automatically started. "Roll release" is done by pressing the button.

The main difference between the model G5012 and G5010 is the double winding arm. A significant advantage of the trailer winding round rolls is that the rolls are loaded directly onto the field. Thus, the selection and delivery of rolls are performed in the direction of movement of the baler. Automatic remote control of the winding hand also contributes to a smooth performance.

Specifications

Model G5010:

Weight: 1.620 kg | Length: 3,750 mm | Width: 2,700 mm | Height: 3,030 mm

  • For coils with a diameter of 0.90 - 1.50 m with a standard winding arm
  • For coils with a diameter of 0.90 - 1.35 m (height changed to 2.760 mm)

Model G5012:

Weight: 1,740 kg | Length: 3,750 mm | Width: 2,700 mm | Height: 3,030 mm

  • For coils with a diameter of 0.90 - 1.50 m with a standard winding arm
  • For coils with a diameter of 0.90 - 1.35 m (height changed to 2.760 mm)

Basic equipment

 

  • Double winding arm (for model G5012)
  • Hydraulically tilted table;
  • 4 belt conveyors for rolls with belt guides and 4 guide rollers for belt guides;
  • Pick up the roll in front, roll out the back;
  • Film tensioner with a length of 750 mm
  • Automatic film capture and trimming system;
  • Stock of 6 rolls of film;
  • Hydraulically controlled swivel drawbar with manual control and low coupling;
  • Lighting system and indicators
  • Work lights;
  • Tires 15.0 / 55-17AW;
  • Semi-automatic control program STANDARD with remote control:

 

"Roll selection" is controlled manually using an electronic joystick. The cycles of the winding process "and" grabbing and trimming the film "are started automatically. "Roll release" is done by pressing the button.

Required Connections

 

  • 1 double-acting section and 1 with free drain for supplying the winding and 1 double-acting section for the swiveling pull rod
  • 3-pole power socket
  • 7-pole socket for the whole lighting system

 

Optional equipment

  • Tires 19.0 / 45-17 (width is changed to 2.850 mm);
  • Combined film tensioner for film width from 500 mm to 750 mm; the degree of overlap can be adjusted;
  • Drive hydraulic plant (without hydraulic oil) includes a reducer with a hydraulic pump, a filter for return lines and a tank for hydraulic oil for 30 liters;
  • Film monitoring - the winding process stops if the film is torn or consumed;
  • Emission pad - for accurate ejection of the roll to the ground;
  • An additional roller for the winding table does not allow the roll to fall off the winding table on inclined surfaces;
  • Tilting device for the roll (including an additional roller) - when the winding process is completed, the roll is placed on the right front side in the direction of travel;
  • Two-line pneumatic braking system;
  • Hydraulic braking system with battery and detachable quick-release valve;
  • Hydraulic braking system without battery and detachable quick-release valve;
  • Lighting lights;
  • Battery cable 5.3 m, 2x6 mm2 with 3-pin socket.